ENGINEERING STEELS + ALLOYS
Hydraulic Cylinder Tube (Honed) |
|---|
| Interlloy Hydraulic cylinder tube is stocked in a wide range of sizes and wall thicknessess. A variety of finishes and grades are available ex-stock and ex-mill, for example:
For further technical information, please contact our sales office. |
| Colour Code | ||
| Yellow Band | ||
| Typical Composition | ||
| Value % | ||
| Carbon | .25 | |
| Silicon | .30 | |
| Manganese | .80 | |
| Phosphorous | 0.4 Max | |
| Sulphur | 0.5 Max | |
| Mechanical Properties - Minimum Values | ||
| Tensile Strength | 586 MPa | |
| Yield Strength | 517 MPa | |
| Imperial | ||
| OD | ID | Wall |
| 2-3/8" | 2" | 3/16" |
| 2-7/8" | 2-1/2" | 3/16" |
| 3-3/8" | 3" | 3/16" |
| 3-7/8" | 3-1/2" | 3/16" |
| 4-1/8" | 3-3/4" | 3/16" |
| 4-3/8" | 4" | 3/16" |
| 4-5/8" | 4-1/4" | 3/16" |
| 2" | 1-1/2" | 1/4" |
| 2-1/4" | 1-3/4" | 1/4" |
| 2-1/2" | 2" | 1/4" |
| 2-3/4" | 2-1/4" | 1/4" |
| 3 | 2-1/2" | 1/4" |
| 3-1/2" | 3" | 1/4" |
| 3-3/4" | 3-1/4" | 1/4" |
| 4 | 3-1/2" | 1/4" |
| 4-1/2" | 4" | 1/4" |
| 5 | 4-1/2" | 1/4" |
| 5-1/2" | 5" | 1/4" |
| 6 | 5-1/2" | 1/4" |
| 8-1/2" | 8" | 1/4" |
| 5-3/4" | 5" | 3/8" |
| 6-1/4" | 5-1/2" | 3/8" |
| 6-3/4" | 6" | 3/8" |
| 6 | 5" | 1/2" |
| 7 | 6" | 1/2" |
| 8 | 7" | 1/2" |
| 8-1/2" | 7-1/2" | 1/2" |
| 9 | 8" | 1/2" |
| Metric | ||
| OD | ID | Wall |
| 55 | 40 | 7.5 |
| 75 | 60 | 7.5 |
| 10 | ||
| 95 | 75 | 10 |
| 110 | 90 | 10 |
| 130 | 110 | 10 |
| 140 | 120 | |
| 15 | ||
| 160 | 130 | 15 |
| 170 | 140 | 15 |
| 190 | 160 | |
Interlloy believes the information provided is accurate and reliable. However no warranty of accuracy, completeness or reliability is given, nor will any responsibility be taken for errors or omissions.
